Bayii Girişi


  Resmi büyüt

Ax6220 2x900W/4 Ohm, Digital Amplifikatör, Usb/Ethernet Kontrol

Yazdırılabilir Sürüm

 

The AX6220 Low Impedance Power Amplifier from Behringer is a dual channel rack mount power amplifier that offers digital control for a variety of applications including distributed music, paging systems, and other AV uses. The 24 bit, 96 kHz convertors provide high fidelity audio for the Eurocom AX6220's digital signal processor, or DSP, which includes delay, crossover, and dynamics as well as an eight band parametric and two band dynamic EQ. Onboard DSP also includes Behringer's "Zero Attack" limiters, designed to protect connected speakers. The AX6220 settings can be controlled and saved remotely using your PC's Ethernet connection and Behringer's free Amp Remote software (available through their website). The unit can also be directly controlled with its front panel LCD screen. Switch-Mode Power technology provides up to 73% power efficiency to reduce power consumption Dual-channel power amplifier designed for continuous operation Two transformerless, cool-running Class-H amplifiers drive low-impedance loads down to 2 Ω 


 

Power Output 480 w per channel @ 8 Ω stereo @ peak, 1% thd, 1 kHz sine wave
900 w per channel @ 4 Ω stereo @ peak, 1% thd, 1 kHz sine wave
1400 w per channel @ 2 Ω stereo @ peak, 1% thd, 1 kHz sine wave
1750 w per channel @ 8 Ω bridged @ peak, 1% thd, 1 kHz sine wave
2600 w per channel @ 4 Ω bridged @ peak, 1% thd, 1 kHz sine wave
400 w per channel @ 8 Ω stereo @ rms, 1% thd, 1 kHz sine wave
650 w per channel @ 4 Ω stereo @ rms, 1% thd, 1 kHz sine wave
1000 w per channel @ 2 Ω stereo @ rms, 1% thd, 1 kHz sine wave
1300 w per channel @ 8 Ω bridged mono @ rms, 1% thd, 1 kHz sine wave
2000 w per channel @ 4 Ω bridged mono @ rms, 1% thd, 1 kHz sine wave
Inputs 2x 3-pin Euroblock
2x XLR/TRS combo
Outputs 2x Speakon
4x binding post
Gain 34 dB @ 8 Ω
Minimum Load Impedance 2 Ω
Frequency Response 20 Hz - 20 kHz, -1 dB @ 1 W, 1 kHz dBr into 8 Ω
Total Harmonic Distortion (THD) < 0.25% @ 1 W, 1 kHz dBr into 8 Ω
Signal to Noise Ratio 87 dB @ input 2 dBu
93 dB @ +22 dBu
Damping Factor > 220 @ 8 Ω
Crosstalk > -70 dB @ rated power, 1 kHz
Indicators Power indicator LED ring illumination (yellow)
Overload/Protection LED ring(red)
LCD display VU meters
System fault, overcurrent/overdrive indicators
Operating Temperature 14° to 104° F (-10° to 40° C)
Cooling Method Automatic variable speed fan rear to front airflow
PC Control Type B USB on front or IEEE 802.3 Ethernet network connector on back panel
Display LCD 128 x 32, amber backlit
Delay 0 - 300 ms
Crossover 3 filter types per channel: (Butterworth, Bessel, Linkwitz-Riley) up to 48 dB/octave
Digital Equalizer 8-band parametric, 2-band dynamic (per channel)
Dynamics Digital zero attack limiter (per channel)
Presets 20 total presets, 19 user definable
Power Consumption 7 a @ 220-240 v~50/60 Hz
12 a @ 120 v~60 Hz
14 a @ 100 v~50/60 Hz
Power Efficiency 69%
AC Power Source 100~120 v ac 50/60 Hz
220~240 v ac 50/60 Hz
Rack Size 1 unit
Dimensions (H x W x D) 3.7 x 17.0 x 16.0" (95.0 x 432.0 x 406.0 mm)
Weight 21.4 lb (9.7 kg)

 

* Teknik özellikler önceden bildirilmeksizin değiştirilebilir.

Marbim Şimdi Facebook'ta Twitter

Anasayfa  |  Kurumsal |   Destek  |  Eğitim  |   İnsan Kaynakları  İletişim
Tüm Hakları Saklıdır. Copyright 2013 Marbim Haberleşme ve Bilişim Teknolojileri
Tel.: 0850 259 06 72 | info@marbim.com
Altyapı: Etkinweb