Bayii Girişi


  Resmi büyüt

P3000RL 2x1300W/ 4ohm Remote Control Power Amplifier

Yazdırılabilir Sürüm

 

High-power performance and control, installed or on tour 1800 W per channel (2 Ω) Class-AB design IRIS-Net enabled for remote control, monitoring, and DSP processing via included RCM-24 module Eight recallable DSP/configuration presets System check button for fast, complete test of all connected cables and loudspeaker components Two GPI and two GPO ports Parallel RJ-45 CAN bus connectors Pilot tone detection for cable supervision

 


 

Amplifier Gain 34 dB
Connector Type Speakon NL4
Continuous Rated Power (1 kHz, THD 1%) 2Ω 1800 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1300 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 850 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1200 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 750 Watts
Control Protocol CAN-Bus
Controls 2 x 0 V, 5V free configurable, Easy-Remote
Cooling Front-to-rear, three 4-stage fans
DIM 30 < 0.01 %
Electronics Type Amplifier
FIR-Drive No
Frequency Response 20 - 20,000 Hz -1 dB
Impedance 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ XLR Input
Input Sensitivity 1.55 V +6dBu
Intermodulation Distortion (SMPTE) < 0.001 %
Maximum Bridged Output 4Ω 3600 Watts
Maximum Bridged Output 8Ω 2600 Watts
Maximum Input Voltage 8.7V +21 dBu
Network Control (IRIS-Net) Yes
Serial Interface Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
Signal-to-Noise Ratio (A-weighted) 109 dB
Topology Class-AB
Total Harmonic Distortion < 0.05 %
Height 3RU 132.5 mm (5.22")
Width 483 mm (19.02")
Depth 390 mm (15.35")
Weight Net 30 kg (66.14 lbs)
* Teknik özellikler önceden bildirilmeksizin değiştirilebilir.

Marbim Şimdi Facebook'ta Twitter

Anasayfa  |  Kurumsal |   Destek  |  Eğitim  |   İnsan Kaynakları  İletişim
Tüm Hakları Saklıdır. Copyright 2013 Marbim Haberleşme ve Bilişim Teknolojileri
Tel.: 0850 259 06 72 | info@marbim.com
Altyapı: Etkinweb