Bayii Girişi


  Resmi büyüt

CPS-2.6 II Installation Amplifier, 2x600W/4 ohm

Yazdırılabilir Sürüm

 

Up to 2 x 900 W into 2 ohms

Phoenix-type input and output connections

Remote power-on/off contact

Rear-mounted attenuators

Programmable time for custom power-on delay settings

Module slot for optional RCM-810 card, allowing  control and monitoring

Switchable 50 Hz high-pass filter

Three-stage front-to-rear fans

Class-AB design

Complete protection package


 

Amplifier Gain 32 dB
Analog Inputs 2, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω 900 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 600 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 380 Watts
Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω 500 Watts
Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω 250 Watts
Cooling Front-to-Rear, 3-stage fans
Crossover Type Optional Modules
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 10 Hz - 40 kHz ±1 dB
Impedance 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ
Input Sensitivity +3.1 dBu (1.11Vrms)
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured)
Maximum Bridged Output 4Ω 1800 Watts
Maximum Bridged Output 8Ω 1200 Watts
Maximum Input Voltage +21 dBu 8.69 Vrms
Network Control (IRIS-Net) Optional
Slew Rate 26 V/µs
Topology Class-AB
Total Harmonic Distortion 0.03 %
Variable Load Drive (VLD) No
Height 2RU 88.1 mm (3.47")
Width 482.6 mm (19")
Depth 421.5 mm (16.59")
Weight Net 14.8 kg (32.63 lbs)

 

* Teknik özellikler önceden bildirilmeksizin değiştirilebilir.

Marbim Şimdi Facebook'ta Twitter

Anasayfa  |  Kurumsal |   Destek  |  Eğitim  |   İnsan Kaynakları  İletişim
Tüm Hakları Saklıdır. Copyright 2013 Marbim Haberleşme ve Bilişim Teknolojileri
Tel.: 0850 259 06 72 | info@marbim.com
Altyapı: Etkinweb